All Borough HVAC

HVAC Supply

DP 1030 Water base Duct Sealant/sealer


  • DP 1030 is recommended for sealing joints, seams, and duct wall penetrations on metal air duct.
  • DP 1030 is recommended for sealing connections on flexible duct or fiberglass duct board.
  • DP 1030 is recommended up to 15 inches water column pressure
SKU: DP1015 Duct Sealer gallon Categories: , Tag:


Technical Data:
Color: Gray or White
Base: Water
Chemical Family: Synthetic Latex
Solids Content: 66 ± 2%
Viscosity: Approx. 300,000 – 400,000 cps
Shore A Hardness: Greater than 20
Application Temperature: 40°F – 110°F
Storage Temperature: 40°F – 110°F
Freeze/Thaw Stability: Do not allow to freeze
Service Temperature: -25°F – 200°F
Flammability: Non-flammable wet or dry
Flash Point: No flash to boiling
Shelf Life: 2 Years (unopened containers)
Cure Time: 24-72 hours depending on temperature, humidity, and
Coverage: Dependent on application thickness, 40-80 sq. ft. at
20-40 wet mils
Clean Up: Use warm water and soap
Packaging: 1/12 gallon tubes, 1 gallon pails, 2 gallon pails,
5 gallon pails, 54 gallon drums
Pressure Classes: Meets all SMACNA pressure classes
Seal Classes: Meets all SMACNA seal classes
VOC: 0 g/l

Features and Benefits:
• LEED V4 Qualified
• UL Listed
• Excellent Workability
• Crack and Peel Resistant
• Mold and Mildew Resistant
• Excellent Dry Adhesion
• Indoor and Outdoor Usage
• Sag Resistant
• Excellent Water and U.V. Resistance
• Meets CDPH Emission Requirements
• Meets FDA, USDA, and EPA Standards
• Meets Requirements of NFPA 90A & 90B, ASTM E-84, and UL-723
• Paintable with latex or epoxy paints after cured

Additional information


Gallon, Tube


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

All search results